mR-SFZ200
1. MR-SFZ200 Battery heat sealing machine is a compact heating sealer for sealing aluminum-laminated films during pouch cell (polymer Li-Ion cell) case preparation.
2.The battery heat sealing machine adopts soft sealing bar, The sealing is copper in bottom and aluminum and Silicone rubber piece on top. So it can be used for both top and side sealing for pouch cell.
3.It can prepare the pouch cell for the injection of electrolyte by sealing the side and top of the pouch cell with tab.
1) The machine can be used for different sizes batteries and can be adjusted easily by speed governing (or changing) clamps or adjusting (or changing) end cover.
2) Top and bottom end covers are drove by two cylinders, moving elastically.
3) The cover is made of cooper material, having good heat effectiveness and saving electricity.
4) The pressure of top end cover can be adjusted by valve regulation.
5) The temperature of top and bottom end covers can be adjusted by temperature controller.
6) The machine has the warning function on temperature anomaly.
7) The Machine has great protective function with safety light curtain and double buttons protection.
8) The machine has PLC controller for easily operating. It's light for carrying.
9) The machine's rack is made of aluminum with good-looking. It can take manual operation while testing machine and take PLC auto-operation while bulk producing.
|
Top/ Side Heat Sealing Machine MR-SFZ200 |
|
|
200 mm Max. (200mm~400mm can be customized) |
|
|
5mm±0.4 (3-10mm can be customized) |
|
|
60 - 300um (depending on the thickness of the aluminum film) |
|
|
200 - 700um (depending on the thickness of the aluminum film) |
|
|
RT-250 degree adjustable |
|
|
±2 degree |
|
|
0-99s adjustable |
|
|
The thickness difference between any two points is less than 15um |
|
|
5-8kg/cm2 |
|
|
Greater than or equal to 400 times/hour |
|
|
AC220V/110V, 50/60Hz |
|
|
0.5KW |
|
|
L430x W330x H480mm |
|
|
35Kg |
|
|
1. Upper Heating Blade Temperature: 200 degree 2. Lower Heating Blade Temperature: 180 degree 3. Pressure: 40 psi 4. Duration: 3 seconds
B. Vacuum Sealing Machine (for pre-sealing in glove box after injection of electrolyte)
|
Tagiau poblogaidd:
