Fast Pneumatic Coin Cell Crimping Machine for CR20XX Series Coin Cells, Cleanroom & Ar Glovebox Compatible
1. MR-QF150 Pneumatic Coin Cell Crimping Machine is a newly designed coin-cell sealing machine with lighter weight. It's mainly used for coin cell battery material lab researching, Capacitor sealing research, also be used in small batch trial production in factories. Equipped with different die, also used for disassemble battery, press electrode sheet, press battery powder, etc.
2. The crimper is suitable for sealing various types of CR20XX coin cells such as CR2032,CR2025,and CR2016 with adjust the sealing line and without changing the die.It can also crimp CR16XX, CR24XX, CR30XX and other special size cases with optional die sets.
3. In addition, customers can easily replace the original die for disassembling purpose.
4. It can also be worked in glove box with smaller volume.
|
Pneumatic Coin Cell Crimping Machine MR-QF150 |
|
|
0.6 0. 8mpa argon, nitrogen cylinders, or compressed air (Not suggest to use compressed air in glove box) |
|
|
Specially designed exhaust port, can external via connected by kf40 and other devices |
|
|
The gas consumption of single seal is about 480 ml |
|
|
Manual control valve, maximum pressure 1mpa. recommended pressure 0.7mpa. accuracy ±0.5% |
|
|
30mm |
|
|
Standard crimping die is CR20xx, with optional die sets |
|
|
as CR16, CR20, CR24,CR30, etc. |
|
|
L290mm*W205mm*H330mm |
|
|
N.W |
25Kg |
|
Do not use an air compressor when operating the unit in the glove box. Otherwise, air can flow inside and cause contamination. Use high purity inert (Ar or N2) gas instead. To avoid damaging the machine, the gas pressure must be lower than 1.0MPa (10 bars or 145 PSI). |
|
|
MR-SF120 is a hydraulic manual crimper. It is suitable to use an outside glovebox at a lower cost. It is a little difficult to operate inside the glove box, and also may be risky on oil leaking for long time use MR-QF150 is driven by all of the types of inert gases at the faster and no NRTL certification is needed. MR-DF160 is driven by electricity and is good for use in the glovebox with N2/Ar. but speed is a little slower than MR-QF150. It has a compact size and can be transformed via the air-lock chamber of the glovebox.
|
Tagiau poblogaidd:
